The SMART CHOICE for all your plumbing needs in Oregon, Washington, Nevada, Idaho, Arizona, & California

Tips To Resolve Pilot Light Issues With Your Water Heater

low water pressure

Are you experiencing pilot light issues with your water heater in Central Oregon? Don’t worry; Einstein Plumbing is here to assist you.

Pilot light problems can be frustrating and disruptive, but with the right knowledge and guidance, you can resolve them effectively.

In this guide, we’ll explore practical tips and strategies to help you troubleshoot and resolve pilot light issues with your water heater. Whether you’re dealing with a pilot light that won’t stay lit, struggling to relight it, or encountering other related issues, we’ve got you covered.

3 Tips To Prevent Water Heater From Freezing

Pilot Light Issues

If you’re experiencing pilot light issues with your water heater in Central Oregon, don’t worry—Einstein Plumbing is here to help. Follow these three main tips to address and resolve pilot light issues effectively and safely:

1. Ensure Proper Ventilation

Clear Obstructions

Check for any obstructions around the water heater that may be affecting ventilation, such as dust, debris, or nearby objects. Ensure that the area around the water heater is clear and well-ventilated to allow proper airflow.

Address Drafts

Drafts in the area can disrupt the pilot light’s flame, causing it to go out unexpectedly. Seal any drafts around doors, windows, or vents near the water heater to minimize interference with the pilot light.

2. Inspect and Clean Pilot Assembly

Locate Pilot Assembly

Find the pilot assembly on your water heater, typically located near the bottom of the unit. Follow the manufacturer’s instructions for accessing and inspecting the pilot assembly.

Clean Pilot Orifice

Carefully clean the pilot orifice using a small brush or compressed air to remove any dirt, dust, or debris that may be obstructing the flow of gas to the pilot light. Ensure that the orifice is clear and free from any buildup.

3. Check Thermocouple Functionality

Test Thermocouple

The thermocouple is a safety device that detects whether the pilot light is lit. If the thermocouple detects that the pilot light is not lit, it will automatically shut off the gas supply to prevent gas leaks. Test the functionality of the thermocouple by checking for continuity using a multimeter.

Replace if Necessary

If the thermocouple is not functioning correctly, it may need to be replaced. Contact Einstein Plumbing or a licensed plumber in Central Oregon to inspect the thermocouple and replace it if necessary.

Additional Tips To Prevent Water Heater From Freezing

4. Check Gas Supply

Verify Gas Supply

Ensure that the gas supply to your water heater is turned on and sufficient to maintain the pilot light flame. Check the gas shut-off valve near the water heater and confirm that it is in the open position.

Test Gas Pressure

Test the gas pressure using a pressure gauge to ensure it meets the manufacturer’s specifications. Low gas pressure can affect the pilot light’s ability to stay lit, so it’s essential to verify adequate gas flow.

5. Inspect Gas Control Valve

Examine Gas Control Valve

Inspect the gas control valve on your water heater for any signs of damage, corrosion, or malfunction. The gas control valve regulates the flow of gas to the pilot light and main burner, so any issues with the valve can affect the pilot light’s operation.

Clean or Replace Gas Control Valve

If the gas control valve is dirty or faulty, it may need to be cleaned or replaced. Carefully follow the manufacturer’s instructions for cleaning or replacing the gas control valve, or contact a professional plumber for assistance.

6. Consider Environmental Factors

Account for Altitude

If you live in a high-altitude area like Central Oregon, the altitude can affect the combustion process and the performance of your water heater’s pilot light. Consult the manufacturer’s recommendations or a licensed plumber for guidance on adjusting the pilot light for high-altitude operation.

Address Temperature Fluctuations

Extreme temperature fluctuations, especially during winter in Central Oregon, can impact the performance of your water heater’s pilot light. Insulate the water heater and surrounding pipes to help maintain consistent temperatures and minimize the risk of pilot light issues.

By incorporating these additional tips into your approach for resolving pilot light issues with your water heater, you can enhance your ability to troubleshoot and address potential problems effectively. For professional assistance or further guidance, don’t hesitate to reach out to Einstein Plumbing in Central Oregon.

FAQs on Preventing Water Heater From Freezing

How can I relight the pilot light on my water heater?

Relighting the pilot light on your water heater is typically a straightforward process. Start by locating the pilot light assembly, usually found near the bottom of the water heater. Follow the manufacturer’s instructions for relighting the pilot light, which may involve turning the gas control knob to the pilot position, pressing the reset button, and using a long lighter or match to ignite the pilot light. Once lit, hold the reset button for a few moments to ensure the pilot light stays lit, then release the button and switch the gas control knob back to the on position.

What should I do if the pilot light on my water heater keeps going out?

If the pilot light on your water heater keeps going out, it could be due to various reasons, including a dirty or obstructed pilot orifice, a faulty thermocouple, or a draft in the area. Start by cleaning the pilot orifice and ensuring there are no obstructions blocking the flame. If the pilot light continues to go out, it may indicate a more significant issue that requires professional attention from a plumber experienced in handling pilot light problems.

Are there common reasons why the pilot light on my water heater won’t stay lit?

Yes, there are several common reasons why the pilot light on your water heater may not stay lit. These include a dirty or malfunctioning pilot assembly, a faulty thermocouple, insufficient gas supply, or a draft in the area affecting the flame. Regular maintenance and cleaning of the pilot assembly can help prevent issues and ensure the pilot light stays lit consistently.

Can I attempt to fix pilot light issues on my water heater by myself?

While relighting the pilot light on your water heater is typically a DIY-friendly task, addressing more complex pilot light issues may require professional expertise. Attempting to fix pilot light issues without the necessary knowledge and experience can be hazardous and may lead to further damage or safety risks. If you encounter persistent pilot light problems or are unsure how to proceed, it’s best to contact a licensed plumber, like Einstein Plumbing, for assistance.

When should I seek professional help for pilot light issues with my water heater?

You should seek professional help for pilot light issues with your water heater if you encounter persistent problems despite attempting basic troubleshooting steps. Additionally, if you notice signs of a more serious issue, such as a strong gas odor, visible damage to the pilot assembly, or repeated pilot light failures, it’s essential to contact a licensed plumber immediately for inspection and repairs. Ignoring pilot light issues can pose safety risks and lead to costly damage to your water heater.

Choose Einstein Plumbing for Your Water Heater Needs

water heater leaking from the top (6)

Contact Einstein Plumbing for all your water heater needs across the Central Oregon area. Our team of experienced plumbers is ready to assist you with any issues or concerns you may have regarding your water heater. From pilot light problems to gas line issues, we have the expertise to diagnose and resolve any issues efficiently and effectively. Trust Einstein Plumbing to keep your water heater running smoothly and your home comfortable.