5 Most Common Air Conditioning Problems

Here are the five most common air conditioning problems that homeowners usually experience during hot summer months. Even if your AC unit is newer and you have it serviced regularly, there are still some problems that can occur.
Generally speaking even in plumbing or water heaters, most issues are associated with the quality of installation, service, or an overall lack of maintenance. Discover the most common causes of air conditioner problems and the tips on how to detect and prevent them.
Faulty Installation and Poor Maintenance
Air Conditioning most common problems often are caused by faulty installation, poor service, and low maintenance. If your AC is installed improperly or not charged correctly, you can expect problems such as Leaky ducts, Low air flow, and inefficiency.
Air conditioning systems cannot last forever. Be certain to keep filters and coils clean to maintain your unit working efficiently. Make sure that air intakes are open, and your unit can get proper airflow.
Refrigerant Leaks
Air conditioning systems need the appropriate amount of refrigerant to do their best. Low refrigerant means either a faulty installation or a leak. And adding a refrigerant is not going to solve your problem. A qualified HVAC technician in Oregon, Washington, and Nevada should fix any leak, test the repair, and then charge the system with the correct amount of refrigerant.
Faulty Wiring
Incorrect wiring during the installation process can lead to the air conditioning unit not getting enough electricity for it to function. Thus, faulty wiring can result in overloading the electrical circuits and trip the circuit breakers. In a serious note, the circuit breakers can fail, if that happens, the circuits will heat up until a fire is ignited.
Thermostat Problems
A thermostat is used to sensor the temperature of the surroundings so that the air conditioning unit knows when to cool and when to stop. One of the most common reason that a thermostat malfunction is because of misalignment of the heat sensor placed before the evaporator coil.
If the sensor is not in the correct position, the air conditioner could continually cycle or start turning on and off. The sensor should be close to the coil but not touching it. Adjust its position by carefully bending the wire that holds it in place.
Clogged Drains
Ensure that your condensation drain isn’t clogged and is working correctly. If there is water on the floor at the base of the system, this is a hint that the drain may be plugged. You can also have water leaks that damage your walls, ceilings, and furnaces. If you don’t notice it right away, you’ll eventually have mold growth.

When you detect that your air conditioner is not functioning correctly, you should address the issue immediately to prevent it from becoming a larger, and more expensive problem.

For professional help diagnosing and repairing plumbing, heating & cooling, water heater, and sewer & main line problems and more, contact Einstein Plumbing, Heating, and Cooling at 888-671-7767 or email us at support@einsteinplumbing.com.

3 thoughts on “5 Most Common Air Conditioning Problems”

  1. My air conditioning recently quit working but I haven’t been sure of what it is exactly. I think it could be a refrigerant leak, because we have tried to put more in, and it doesn’t seem to help. I definitely don’t have the expertise or the materials to fix that, so I’ll probably call someone to get it fixed so that we can be more comfortable and cool at home! Thanks for the great information!

  2. very informative article thanks for sharing this post your post was very helpful.I have also analyzed these common issues with my air conditioner at home.For more advanced plumbing services visit here

  3. I think that this article article will help me figure out what’s the problem about my air comditioner. Thanks for sharing this very helpful article. I will now check my air conditioner.

Comments are closed.